XML Feeds
Why use an Anti-Seize Compound instead of a Grease that both contain Molybdenum Disulfide?
by admin 
Molybdenum Disulfide is known for it's ability to keep a part lubricated and low wear protective properties under extreme pressure. With Anti-Seize Compounds there is a lot higher percentage of solids, Molybdenum Disulfide is a solid, as a percentage of the compound than grease. Solids cost more than the carrier, such a petroleum o synthetic but solids is what protects most your parts.
Categories: Announcements, Anti Seize Technology-Products Tags: anti seize compound, grease, higher percentage, molybdenum disulfide, solids
05/14/09 09:57:03 pm, 
3 comments »
05/14/09 09:57:03 pm, 3 comments » 3 comments
Comment from: Steve Smith [Visitor] · http://www.aamco.com/
Anti Seize costs more but it works! It saves a lot of work if you have to disassemble.
05/14/09 @ 22:12
Comment from: admin [Member]
Anti Seize Compounds costs more than Grease but are still relatively cheap, especially in comparison to a new part
05/15/09 @ 01:19
Comment from: Dave Stewart [Visitor] · http://www.antiseize.com/
Anti Seize Technology has the best moly antiseize products. They work great and priced well.
05/15/09 @ 09:54
This post has 5 feedbacks awaiting moderation...